Every device. One tool. Pay once. Modbus · BACnet · Siemens S7 · one-time licence · also from us: ModbusManager ↗
// ashrae 135 annex ab · tls · hub

BACnet/SC
Secure Connect Client & Test Tool

BACnet/SC carries BACnet over a WebSocket on TLS to a hub, and only machines with a certificate from the site's CA can join. BACManager connects to the hub as a node: import its certificate, enter the hub, Open, Discover — and everything else works as on BACnet/IP: objects, polling, writes, COV, schedules, Trend Logs, device alarms, the traffic view, dashboards and the gateway.

Download free trial Connect in four steps

Windows 10/11 · one-time license · 14-day trial

// four steps

Certificates, hub, Open, Discover

StepIn BACManagerWhat you need from the site
1. DatalinkBACnet tab: choose BACnet/SC—
2. Certificates🔐 Certificates…: this computer's operational certificate + key, and the CAa certificate and key issued for this PC (PEM .pem/.crt + .key, or a .pfx/.p12 with its password) and the site's CA certificate
3. HubPrimary hub wss://host:port, Failover hub optionalthe hub's address — often a supervisory controller or the BMS server
4. Open, DiscoverWho-Is goes to every node through the hub— (Target IP and BBMD do not apply on SC)
BACManager BACnet/SC certificates dialog: operational certificate and key CN=BACManager-Test issued by CN=Test Site BACnet CA valid until 2027-11-14 (364 days), CA CN=Test Site BACnet CA self-signed valid 399 days, Import, Export and Remove buttons, warning 30 days before a certificate expires
The certificates belong to this computer: kept in the user's data folder, never in a workspace or a Runtime package
// connected

The status row says where you are

Connected to the primary hub, since when, this node's VMAC, heartbeat. A device's address is its VMAC, shown as sc:….

BACManager on BACnet/SC: primary hub wss://localhost:47890, status Connected to the primary hub with VMAC and heartbeat ok; device AHU-2 (SC), ID 2201, address sc: followed by its VMAC; polling 4 objects: Supply_Air_Temp 18.90, Return_Air_Temp 22.40, Room_Temp_Setpoint 21, Supply_Fan_Status 1
A controller found and polled through the hub; from here on it is the same object list, polling and writes as on BACnet/IP

When the hub goes away BACManager says so and tries again every 5 seconds, the failover hub too; on the failover it tries the primary every 30 seconds and goes back to it.

// why it refused

Checked on Open, and it says which

Hub certificate

Must be issued by your CA and name the host in the hub address. “Check the hub's name in its certificate” can be turned off for sites whose hub certificates name no host.

A clear reason

Expired, not issued by the CA, not naming this host, or the hub not accepting this computer's certificate — BACManager names which, instead of a bare TLS error.

Expiry warning

A certificate within the warning days (30 by default) is marked in the dialog and raised as an alarm, with e-mail or Telegram notifications if you set them.

Export of the operational certificate asks first, since the file holds the private key. A Runtime machine asks for its hub and certificates in the BACnet network service dialog. To see what goes through the hub, use the traffic view — on SC the traffic is encrypted on the wire, so Wireshark alone cannot read it.

// questions

BACnet/SC — FAQ

What is BACnet/SC?+
BACnet Secure Connect (ASHRAE 135 Annex AB) carries BACnet messages over a WebSocket on TLS to a hub, which passes each message on to the node it is for. Every node shows a certificate issued by the site's CA, so only machines with such a certificate can join.
Can BACManager connect to a BACnet/SC hub?+
Yes. Choose the BACnet/SC datalink, import this computer's operational certificate and key and the site's CA, enter the primary hub as wss://host:port (and a failover hub if there is one), then Open and Discover.
Which certificate formats does it accept?+
PEM (.pem or .crt with the .key, chosen together or in one file) and PKCS#12 (.pfx or .p12 with its password).
Does BACManager act as a BACnet/SC hub?+
No. BACManager connects to a hub as a node. The hub is usually a supervisory controller or the BMS server on the site.
What works over BACnet/SC?+
Everything that works on BACnet/IP: discovery, objects, polling, writes with priority, COV, schedules, Trend Logs, device alarms, the traffic view, tags, dashboards and the gateway.
Which version has BACnet/SC?+
BACManager 1.4.9 and newer, included in the standard $149 one-time license — no extra module.

Test a BACnet/SC hub from your laptop

Download the free trial, import the site's certificate and CA, and discover the devices behind the hub. No credit card.

Download free trial See pricing

Windows 10/11 · $149 one-time